FP_strato
Covers, decorates and protects
floors, walls, sports fields, swimming pools
Highly resistant multi-purpose resin paint
CALCULATE THE QUANTITY
Select the type of surface and enter sq.m.
YELD
FP-strato once dry, forms a continuous covering, suitable for vehicles (low traffic), waterproof, stain-proof and resistant over time.
It is a formulation based on acrylic and methacrylate resins with high performance.
FP-strato is single-component, ready to use, quick drying.
It gives the treated surfaces superior characteristics:
► abrasion and mechanical resistance, even at low temperatures
► resistance to water stagnation, UV rays, atmospheric agents
► resistance to occasional contact with chemical agents (e.g. petrol, oil, acidic liquids)
► satin finish, anti-dirt, decorative (with color range)
WHERE TO USE
FP-strato is used on horizontal and vertical, external or internal surfaces of different nature: cement, concrete, plaster, stoneware, terracotta, natural or synthetic stone, cementitious waterproofing, prefabricated panels, already painted walls, other building materials (compact and non-compact). flexible) after adequate treatment of the supports.
It is a multi-purpose professional product suitable for various applications: floors, sports fields or play areas in general, garages, low-traffic car parks, swimming pools, pavements, steps, pedestrian paths, wall surfaces, terraces, ramps, residential accesses, colored skirting for walls (workshops, schools, etc.), wooden buildings.
HOW TO USE
On clean supports and without loose parts. On cementitious, chalky or very absorbent surfaces, pre-treat with PR-G primer. Apply 2 coats, 2/3 hours apart, with a brush, roller or spray.
WARNINGS
It is important to prepare cementitious, chalky or highly absorbent surfaces with PR-G primer.
Apply only on healthy surfaces, free of salt deposits and without rising damp. Do not use on unseasoned screeds or bitumen. Do not use with risk of rain, frost or strong sun.
YELD
Approximately Lt 0.12 per square meter depending on the surface properties (= with 1 litre of FP-layer an average of 8 square metres is treated).
PHYSICAL CHARACTERISTICS
Emulsion based on acrylic and methacrylate resins
Physical appearance of the product: viscous liquid.
Colors: White, Grey, Red, Green.
Final appearance after drying: resistant semi-rigid membrane
PACKAGING AND PRICES
| TYPE | VOLUME (Liters) | PRICE |  |
|---|---|---|---|
| Bucket | 5 | 99.61 | |
| Bucket | 13 | 214.66 |