CS_sanamur
Removes and prevents mould
on walls, floors, stone, terracotta
Anti-mould sanitising solution
CS-sanamur penetrates deeply into the support and acts chemically against spores and bacteria, preventing the development of new infestations. It allows better yield and resistance over time of subsequent treatments (paints, finishes, consolidants, waterproofing). CS-sanamur does not create chromatic alterations and can also be used as a sanitizing cleaner on finished surfaces (marble, statues, terracotta, stoneware, plaster).
WHERE TO USE
CS-sanamur is a solution with a biocidal action for the treatment of surfaces infested with mould, algae, lichens, fungi, moss or other organic substances. It is used on porous and non-porous surfaces, old or new (prevention), outside and inside (walls subject to the action of humidity). Specific for the reclamation of stone surfaces in monumental restoration.
HOW TO USE
It is ready to use and can be applied by brush, spray (low pressure) or pad. Leave to act for 2/3 hours for superficial cleaning and up to 24 hours for a stronger action. Then wash well with water. Remove any stubborn residue by brushing and washing again. On very degraded supports repeat the treatment after 24 hours.
WARNINGS
Do not brush the supports before use to remove mold, as the spores may disperse. CS-sanamur is not compatible with acids, avoid its use before, during and after the working cycle.
YELD
0.050 liters for square meter, depending on support type and damage degree. One lt of CS sanamur treat around 20 square meter surface.
PHYSICAL CHARACTERISTICS
Biocidal emulsion.
Appearance: Liquid.
PACKAGING AND PRICES
| TYPE | VOLUME (Liters) | PRICE |  |
|---|---|---|---|
| Spray | 0,5 | 8,17 | |
| Bottle | 1 | 10.61 | |
| Tank | 5 | 45.75 | |
| Tank | 25 | 189.10 |