CS_prefughe
Prepares before grouting
terracotta, stoneware and stone tiles
Transparent pre-seal protection
CS-prefughe offers several advantages:
• Avoids deep absorption of cement joints, facilitating cleaning operations against installation dirt.
• It does not create films and leaves the appearance and breathability of the surfaces unaltered.
• Does not alter the adhesion of mortars and joints to the treated materials.
• Protects the joints and treated surfaces from damage caused by rising damp (mold, efflorescence, stains, saltpeter).
• Allows the application of subsequent treatments without problems (protection, polishing, waxes, cleaning, etc.).
WHERE TO USE
On terracotta, stoneware, clinker, stone, concrete, marble and non-glossy conglomerate floors or coverings, before grouting with cement stucco.
HOW TO USE
By spray, brush or roller on dry and clean surfaces. Apply a single coat evenly over the entire surface, avoiding surface stagnation.
WARNINGS
Do not use on ceramic or non-absorbent surfaces. On very porous materials (rough stone, rough terracotta) the treatment may be insufficient.
On some surfaces it may have a slight toning effect. Always carry out a preventive test on a small part of the material to be treated to verify the absence of color variations and the actual validity of the treatment.
YELD
With 1 liter of CS-prefughe, an average of 7 mq is treated. Approximately 0.15 liters for each mq depending on the type of surface.
PHYSICAL CHARACTERISTICS
Water-based emulsion of synthetic resins.
Physical appearance of the product: transparent liquid.
Final appearance after drying: invisible.
PACKAGING AND PRICES
| TYPE | VOLUME (Liters) | PRICE |  |
|---|---|---|---|
| Bottle | 1 | 11.96 | |
| Tank | 5 | 46.97 | |
| Tank | 25 | 213.50 |