Primers

Adhesion improvers, fixatives, primers

Back to list

PR_rust stop

Iron saver converts and stops rust on iron and metal surfaces
Quick converter primer

CALCULATE THE QUANTITY

Select the type of surface and enter sq.m.

YELD

PR-rust stop transforms rust by blocking the oxidation process. It reacts quickly by transforming the oxidized parts into a blue-black metal-organic salt and creating a barrier effect.

WHERE TO USE

Specific for the restoration of the ironwork of reinforced concrete structures (recovery of pillars, beams, balconies, facades, etc.) and before any painting of oxidized metal surfaces (railings, window frames, etc.). PR-rust stop can also be used on new iron (prevention).

HOW TO USE

PR-rust stop is ready to use and can be used by brush, spray or dip. The surfaces to be treated must be thoroughly clean and dry. The most obvious and easy to remove rust must be removed with a steel brush. Pour the product into a clean (non-metallic) container and apply one coat or more, depending on the amount of rust to be treated, approximately 30 minutes apart. After 3 hours the treated surfaces are ready for subsequent treatments.

WARNINGS

Protect the surfaces adjacent to the surfaces to be treated. Carry out subsequent treatments (re-casting, painting, etc.) within and no later than 72 hours.

YELD

1 liter of PR-rust stop treats an average of 20 mq (= approximately 0.050 liters for mq depending on the surface type).

On rebar, purely as an indication, with 1 liter of PR-rust stop you can treat on average 50 linear meters of 10 mm diameter rod (1 coat).

PHYSICAL CHARACTERISTICS

Synthetic polymer emulsion
Physical appearance of the product: cream colored liquid.
Final appearance after drying: resistant blue/black film.

PACKAGING AND PRICES
TYPE VOLUME (Liters)PRICE info
Bottle 0,2510.94
Bottle 0,7519.36
Tank 498.21
Tank 25586.45