Prepares
exterior and interior walls before painting
Concentrated insulating fixative
PR-gattofix makes the support uniform, increasing the anchoring, yield and resistance over time of subsequent treatments. Reduces the formation of efflorescence and mold by eliminating the phenomena of paint detachment. It also allows the consolidation and elimination of dust on surfaces where coatings are to be applied using paste adhesives. The wall putty, added with PR-gattofix, improves adhesion and sealing power.
PR-gattofix allows optimal preparation of wall surfaces before finishing treatments. Treatments can be carried out on old or new wall surfaces, both internal and external. The treated surfaces will be ready for subsequent treatments: application of water-based paints, quartz, scratches, finishes, etc.
The supports to be treated must be dry, coherent and clean. Eliminate mould, efflorescence and plug any cracks. Dilute 1 liter of PR-gattofix in 12 liters of water. The mixture obtained can be applied by brush, roller or spray. Once dry (approximately 6 hours), the surfaces will be ready for subsequent treatments.
In the case of surfaces degraded by mould, it is preferable to use "PR-antimold - anti-mold insulating fixative". On walls degraded by humidity or highly crumbling, use "PR-HP, high-penetrating, anti-efflorescence acrylic insulating fixative".
With 1 liter of PR-gattofix in 12 liters of water you can treat approximately 40 mq.
Approximately 0.025 liters for each mq. according to the type of surface.
Concentrated emulsion of synthetic resins
TYPE | VOLUME (Liters) | PRICE | |
---|---|---|---|
Tin | 0,75 | 12.21 | |
Bucket | 2,5 | 34.38 | |
Bucket | 5 | 62.44 | |
Bucket | 15 | 159.94 |