PR_antimuffa
Fixative-additive insulating
for masonry surfaces antimould
CALCULATE THE QUANTITY
Select the type of surface and enter sq.m.
YELD
PR-antimuffa It smoothes the substrate increasing the abutment, the yield and the following treatments lifetime. Its action is time lasting avoiding and preventing moulds, efflorescence and paint separation effect. It is possible to increase the product efficiency changing the dilution concentration.
WHERE TO USE
PR-antimuffa allows an optimal preparation of the masonry surfaces even if deteriorated by moulds and similar too. It is for indoor and outdoor use, for old and new (for prevention use) surfaces both.
The treated surfaces will be ready for the following finishing treatments: water paints, quartzite, scraping pattern, finishing touch, etc.
PR-antimuffa can be used as antimould additive for water paints too.
HOW TO USE
Apply only to dry, coherent and clean surfaces. Water down 1 liter of PR-antimuffa with 12 liters. Apply by brush, roller or spray. When used as additive, add 0.75 liters of PR-antimuffa to 13÷15 liters of water paint.
YELD
Approximately 0.025 liters for square meter depending on the surface type. 1 liter of PR-antimuffa watered down with 12 liters treats about 40 square meters.
When used as additive, add 0.75 liters of PR-antimuffa to 13÷15 liters of water paint.
PHYSICAL CHARACTERISTICS
Concentrated emulsion of synthetic resins
Appearance: Dense liquid
Colour: White
Specific weight: 1,020
PACKAGING AND PRICES
| TYPE | VOLUME (Liters) | PRICE |  |
|---|---|---|---|
| Tin | 0,75 | 17.69 | |
| Bucket | 2,5 | 45.14 | |
| Bucket | 5 | 78,08 | |
| Bucket | 15 | 206,18 |