Adhesives

Wall-paper and wall-covering glues

Back to list

AK_G3 blu

Adhesive with strong bonding power for
wallpaper, special paper
and vinyl hangings

AK-G3 blu is an adhesive based on high quality natural and synthetic reinforced pure resins. When watered down it changes to a strong adhesive paste, easily tooling and resistant to moulds and heat.

WHERE TO USE

It is used for gluing heavy wallpaper, vinyl hangings coupled over paper or fabric, special hangings and similar walls coverings. A strong adhesive can be obtained decreasing the dilution. It can be applied with a spatula for wall sheet coverings (polystyrene, hangings under layers, etc.).

HOW TO USE

AK-G3 blu must be watered down and stirred during the dilution before using it.
A lump free and very smooth homogeneous adhesive paste is obtained after 20÷25 minutes of settling time. Apply on clean and smooth surfaces that are free from previous product residuals. Non absorbing surfaces must be roughend prior to the application. Shake well again before applying and smear in the back of the wall covering. Leave to stand for 5÷10 minutes then apply to the wall smoothing with a spatula. For very absorbing walls apply a primer coat obtained by watering down 1 dose of AK-G3 blu in 15 liters.

YELD

1 case of AK-G3 blu can glue 30 to 50 square meters of wallpaper depending on the absorption and the substrate characteristics.

PHYSICAL CHARACTERISTICS

Adhesive based on natural and synthetic reinforced pure resins
Appearance: Mixture in granules
Colour: White

PACKAGING AND PRICES
TYPE DOSESPRICE info
Case 110,61